UnityViewer OB16 not following height of 100%.

[Jim_Craft]

In OnBase 13 the UnityViewer used to fill the entire page (or frame) if the height and width were set to 100%.  In OB16 the UnityViewer doesn't seem to recognize a height of 100%.  If I set a hard value it will follow but it isn't following percentage correctly.  I have tried it in both ActiveX and HTMLEnhanced mode.

[Adam_Ryman · Accepted solution]

Good Afternoon Jim,

To troubleshoot this issue we will need to take a look at the configuration and see the behavior that is occurring within your environment.

Please contact your first line of support to further troubleshoot this issue.  

[Adam_Ryman · Accepted solution]

Good Afternoon Jim,

To troubleshoot this issue we will need to take a look at the configuration and see the behavior that is occurring within your environment.

Please contact your first line of support to further troubleshoot this issue.  

[Jim_Craft · Accepted solution]

I fixed it.  For some reason in the new Viewer aspx I had to add a style="height:100%" to the form tag as well.  In the old version I didn't have to.  I'm just glad it works... 

Thanks,