Mass Update Form Identification Zones

[Kenny_Burnham]

I have a need to change all of our Forms/Templates to now have a combined rule expression containing And instead of Or. I have tried to play with the XML export file trying to change the zoneformident/connectoperator to various configurations to update the template but I can't find a sequece that works well. I also notice that some times the first zoneformident node changes it's matchtop value. Has any one tried this before or does someone have an explanation as to what configuration I could use to convert them all to ands instead of ors. I included a snippit of the xml code i am playing with below.

    <zoneformident>
      <zoneformidentnum>1165</zoneformidentnum>
      <seqnum>0</seqnum>
      <zoneleft>522</zoneleft>
      <zonetop>4</zonetop>
      <zoneright>595</zoneright>
      <zonebottom>50</zonebottom>
      <zonevalue><![CDATA[RECORD]]></zonevalue>
      <matchleft>525</matchleft>
      <matchtop>7</matchtop>
      <matchflags>393474</matchflags>
      <matchtolerance>196689</matchtolerance>
      <connectoperator>1</connectoperator>
    </zoneformident>
    <zoneformident>
      <zoneformidentnum>1166</zoneformidentnum>
      <seqnum>1</seqnum>
      <zoneleft>28</zoneleft>
      <zonetop>1023</zonetop>
      <zoneright>313</zoneright>
      <zonebottom>1085</zonebottom>
      <zonevalue><![CDATA[,BAKERSFIELD]]></zonevalue>
      <matchleft>27</matchleft>
      <matchtop>1078</matchtop>
      <matchflags>393474</matchflags>
      <matchtolerance>196689</matchtolerance>
      <connectoperator>1</connectoperator>
    </zoneformident>
    <zoneformident>
      <zoneformidentnum>1167</zoneformidentnum>
      <seqnum>2</seqnum>
      <zoneleft>759</zoneleft>
      <zonetop>1072</zonetop>
      <zoneright>822</zoneright>
      <zonebottom>1104</zonebottom>
      <zonevalue><![CDATA['RUBB]]></zonevalue>
      <matchleft>0</matchleft>
      <matchtop>0</matchtop>
      <matchflags>393473</matchflags>
      <matchtolerance>81</matchtolerance>
      <connectoperator>0</connectoperator>
    </zoneformident>

[Tom_Lewis]

Hello Kenny,

We do not recommend that an exported .xml file be changed outside of OnBase. The Automated Index Configuration interface would be the suggested vehicle to make these changes due to the visual representation of the changes and the ability to discard and save changes as you progress.

With that being said, it is possible to make changes like this (on a case by case basis) if there were special circumstances driving the request. If you believe that your scenario would benefit from this type of change, I would recommend that you contact your technical support representative to investigate what changes would need to be made in order to fulfill your request and to provide recommendations or assistance that will guide you through the process of making any necessary changes. 

Thank You,

Tom Lewis

QA Representative, Advanced Capture