1. Your solr WAR is deployed. Check the log for any complaints.
- Solr4 was deployed with installation without issue.
2. If solr is on a different host, make sure 8443 is open on that host and that your Alfresco server can communicate with it.
-Solr is running on the same host and Alfresco host. Alfresco share is running on SSL 443 but did not configure Solr with SSL so it was running on 8443 HTTP as did not know that we needed to have separate SSL for it.
3. If solr is on the same host, make sure you have not done anything to the Tomcat config to remove the 8443 connector, which is used by Alfresco to talk to Solr.
- No change in config - see below -
### Solr indexing ###
index.subsystem.name=solr4
dir.keystore=${dir.root}/keystore
solr.host=localhost
solr.port.ssl=8443
4. If you re-generated the SSH key used by Solr to authenticate Alfresco, make sure that the certificate's DN is configured properly in the Tomcat config.
- Sorry, not sure what you mean
5. Your solr.* settings are set correctly in alfresco-global.properties.
- See no#3
6. Your solr config ($ALF_HOME/solr4/workspace-SpaceStore/conf/solrcore.properties and $ALF_HOME/solr4/archive-SpacesStore/conf/solrcore.properties) points to the correct directory paths and are writable by the process running Alfresco.
- I have not made any changes to these two files-
1) C:\alfresco-community\solr4\workspace-SpacesStore\conf\Solrcore.properties -
#
# solrcore.properties - used in solrconfig.xml
#
# data is in ${data.dir.root}/${data.dir.store}
data.dir.root=C:/alfresco-community/alf_data/solr4/index
data.dir.store=workspace/SpacesStore
enable.alfresco.tracking=true
#
# Alfresco version
#
alfresco.version=5.2.0 (r@scm-revision@-b@build-number@)
#
# Properties loaded during alfresco tracking
#
alfresco.host=localhost
alfresco.port=8080
alfresco.port.ssl=8443
alfresco.baseUrl=/alfresco
alfresco.cron=0/15 * * * * ? *
alfresco.stores=workspace://SpacesStore
#alfresco.index.transformContent=false
#alfresco.ignore.datatype.1=d:content
alfresco.lag=1000
alfresco.hole.retention=3600000
# alfresco.hole.check.after is not used yet
# It will reduce the hole checking load
alfresco.hole.check.after=300000
alfresco.batch.count=1000
alfresco.recordUnindexedNodes=true
# encryption
# none, https
alfresco.secureComms=https
# ssl
alfresco.encryption.ssl.keystore.type=JCEKS
alfresco.encryption.ssl.keystore.provider=
alfresco.encryption.ssl.keystore.location=ssl.repo.client.keystore
alfresco.encryption.ssl.keystore.passwordFileLocation=ssl-keystore-passwords.properties
alfresco.encryption.ssl.truststore.type=JCEKS
alfresco.encryption.ssl.truststore.provider=
alfresco.encryption.ssl.truststore.location=ssl.repo.client.truststore
alfresco.encryption.ssl.truststore.passwordFileLocation=ssl-truststore-passwords.properties
# Tracking
alfresco.corePoolSize=8
alfresco.maximumPoolSize=-1
alfresco.keepAliveTime=120
alfresco.threadPriority=5
alfresco.threadDaemon=true
alfresco.workQueueSize=-1
# HTTP Client
alfresco.maxTotalConnections=200
alfresco.maxHostConnections=200
alfresco.socketTimeout=360000
# SOLR caching
solr.filterCache.size=256
solr.filterCache.initialSize=128
solr.queryResultCache.size=1024
solr.queryResultCache.initialSize=1024
solr.documentCache.size=1024
solr.documentCache.initialSize=1024
solr.queryResultMaxDocsCached=2048
solr.authorityCache.size=128
solr.authorityCache.initialSize=64
solr.pathCache.size=256
solr.pathCache.initialSize=128
solr.ownerCache.size=128
solr.ownerCache.initialSize=64
solr.readerCache.size=128
solr.readerCache.initialSize=64
solr.deniedCache.size=128
solr.deniedCache.initialSize=64
# SOLR
solr.maxBooleanClauses=10000
# Batch fetch
alfresco.transactionDocsBatchSize=500
alfresco.nodeBatchSize=100
alfresco.changeSetAclsBatchSize=500
alfresco.aclBatchSize=100
alfresco.contentReadBatchSize=4000
alfresco.contentUpdateBatchSize=1000
# Warming
solr.filterCache.autowarmCount=32
solr.authorityCache.autowarmCount=4
solr.pathCache.autowarmCount=32
solr.deniedCache.autowarmCount=0
solr.readerCache.autowarmCount=0
solr.ownerCache.autowarmCount=0
solr.queryResultCache.autowarmCount=4
solr.documentCache.autowarmCount=512
solr.queryResultWindowSize=512
#
# TODO
#
# cross language support
# locale expansion
# logging check report ....
#
#
alfresco.doPermissionChecks=true
# Evaluate permissions as a PostFilter. Setting this to false will evaluate permissions as a Query.
alfresco.postfilter=true
#
# Metadata pulling control
#
alfresco.metadata.skipDescendantDocsForSpecificTypes=false
alfresco.metadata.ignore.datatype.0=cm
erson
alfresco.metadata.ignore.datatype.1=app:configurations
alfresco.metadata.skipDescendantDocsForSpecificAspects=false
#alfresco.metadata.ignore.aspect.0=
alfresco.topTermSpanRewriteLimit=1000
#
# Suggestions
#
solr.suggester.enabled=true
# -1 to disable suggester build throttling
solr.suggester.minSecsBetweenBuilds=3600
#
# Limit the maximum text size of transformed content sent to the index - in bytes
#
alfresco.contentStreamLimit=10000000
2)
C:\alfresco-community\solr4\archive-SpacesStore\conf\solrcore.properties
#
# solrcore.properties - used in solrconfig.xml
#
# data is in ${data.dir.root}/${data.dir.store}
data.dir.root=C:/alfresco-community/alf_data/solr4/index
data.dir.store=archive/SpacesStore
enable.alfresco.tracking=true
#
# Alfresco version
#
alfresco.version=5.2.0 (r@scm-revision@-b@build-number@)
#
# Properties loaded during alfresco tracking
#
alfresco.host=localhost
alfresco.port=8080
alfresco.port.ssl=8443
alfresco.baseUrl=/alfresco
alfresco.cron=0/15 * * * * ? *
alfresco.stores=archive://SpacesStore
#alfresco.index.transformContent=false
#alfresco.ignore.datatype.1=d:content
alfresco.lag=1000
alfresco.hole.retention=3600000
# alfresco.hole.check.after is not used yet
# It will reduce the hole checking load
alfresco.hole.check.after=300000
alfresco.batch.count=1000
alfresco.recordUnindexedNodes=true
# encryption
# none, https
alfresco.secureComms=https
# ssl
alfresco.encryption.ssl.keystore.type=JCEKS
alfresco.encryption.ssl.keystore.provider=
alfresco.encryption.ssl.keystore.location=ssl.repo.client.keystore
alfresco.encryption.ssl.keystore.passwordFileLocation=ssl-keystore-passwords.properties
alfresco.encryption.ssl.truststore.type=JCEKS
alfresco.encryption.ssl.truststore.provider=
alfresco.encryption.ssl.truststore.location=ssl.repo.client.truststore
alfresco.encryption.ssl.truststore.passwordFileLocation=ssl-truststore-passwords.properties
# Tracking
alfresco.corePoolSize=1
alfresco.maximumPoolSize=-1
alfresco.keepAliveTime=120
alfresco.threadPriority=5
alfresco.threadDaemon=true
alfresco.workQueueSize=-1
# HTTP Client
alfresco.maxTotalConnections=200
alfresco.maxHostConnections=200
alfresco.socketTimeout=360000
# SOLR caching
solr.filterCache.size=256
solr.filterCache.initialSize=128
solr.queryResultCache.size=1024
solr.queryResultCache.initialSize=1024
solr.documentCache.size=1024
solr.documentCache.initialSize=1024
solr.queryResultMaxDocsCached=2048
solr.authorityCache.size=128
solr.authorityCache.initialSize=64
solr.pathCache.size=256
solr.pathCache.initialSize=128
solr.ownerCache.size=128
solr.ownerCache.initialSize=64
solr.readerCache.size=128
solr.readerCache.initialSize=64
solr.deniedCache.size=128
solr.deniedCache.initialSize=64
# SOLR
solr.maxBooleanClauses=10000
# Batch fetch
alfresco.transactionDocsBatchSize=100
alfresco.nodeBatchSize=10
alfresco.changeSetAclsBatchSize=100
alfresco.aclBatchSize=10
alfresco.contentReadBatchSize=4000
alfresco.contentUpdateBatchSize=1000
# Warming
solr.filterCache.autowarmCount=32
solr.authorityCache.autowarmCount=4
solr.pathCache.autowarmCount=32
solr.deniedCache.autowarmCount=0
solr.readerCache.autowarmCount=0
solr.ownerCache.autowarmCount=0
solr.queryResultCache.autowarmCount=4
solr.documentCache.autowarmCount=512
solr.queryResultWindowSize=512
#
# TODO
#
# cross language support
# locale expansion
# logging check report ....
#
#
alfresco.doPermissionChecks=true
# Evaluate permissions as a PostFilter. Setting this to false will evaluate permissions as a Query.
alfresco.postfilter=true
#
# Metadata pulling control
#
alfresco.metadata.skipDescendantDocsForSpecificTypes=false
alfresco.metadata.ignore.datatype.0=cmerson
alfresco.metadata.ignore.datatype.1=app:configurations
alfresco.metadata.skipDescendantDocsForSpecificAspects=false
#alfresco.metadata.ignore.aspect.0=
#
# Suggestions
#
solr.suggester.enabled=false
# -1 to disable suggester build throttling
solr.suggester.minSecsBetweenBuilds=3600
#
# Limit the maximum text size of transformed content sent to the index - in bytes
#
alfresco.contentStreamLimit=10000000
Thanks again for helping out!
