cancel
Showing results for 
Search instead for 
Did you mean: 

Solr cant initialize keystore

Mei
Champ in-the-making
Champ in-the-making

I'm trying to install Alfresco Search Services using this  guide. I've generated secure keys for SLL communitacion with this  tool and then moved them to <SOLR_HOME>/keystore.

Then I've made configurations in:
 
<SOLR_HOME>/templates/rerank/conf/solrcore.properties:
# solrcore.properties - used in solrconfig.xml
#

enable.alfresco.tracking=true

#
#These are replaced by the admin handler
#
#data.dir.root=DATA_DIR
#data.dir.store=workspace/SpacesStore
#alfresco.stores=workspace://SpacesStore

#
# Properties loaded during alfresco tracking
#

alfresco.host=localhost
alfresco.port=8080
alfresco.port.ssl=8443
alfresco.baseUrl=/alfresco

#alfresco.index.transformContent=false
#alfresco.ignore.datatype.1=d:content
alfresco.lag=1000
alfresco.hole.retention=3600000
# alfresco.hole.check.after is not used yet
# It will reduce the hole checking load
alfresco.hole.check.after=300000
alfresco.batch.count=5000
alfresco.recordUnindexedNodes=false

# encryption

# none, https
alfresco.secureComms=https

# ssl, default values
# keystore and trustore files are not provided by default
alfresco.encryption.ssl.keystore.type=JCEKS
alfresco.encryption.ssl.keystore.location=/opt/alfresco-community-201911/alfresco-search-services/solrhome/keystore/ssl-repo-client.keystore
alfresco.encryption.ssl.keystore.passwordFileLocation=
alfresco.encryption.ssl.truststore.type=JCEKS
alfresco.encryption.ssl.truststore.provider=
alfresco.encryption.ssl.truststore.location=/opt/alfresco-community-201911/alfresco-search-services/solrhome/keystore/ssl-repo-client.truststore
alfresco.encryption.ssl.truststore.passwordFileLocation=

# Default Tracker
alfresco.cron=0/10 * * * * ? *
alfresco.corePoolSize=8
alfresco.maximumPoolSize=-1
alfresco.keepAliveTime=120
alfresco.threadPriority=5
alfresco.threadDaemon=true
alfresco.workQueueSize=-1
alfresco.commitInterval=2000
alfresco.newSearcherInterval=3000
#ACL tracker configuration
#alfresco.acl.tracker.cron=
#alfresco.acl.tracker.corePoolSize=
#alfresco.acl.tracker.maximumPoolSize=
#alfresco.acl.tracker.keepAliveTime=
#alfresco.acl.tracker.threadPriority=
#alfresco.acl.tracker.threadDaemon=
#alfresco.acl.tracker.workQueueSize=
#Content tracker config
#alfresco.content.tracker.cron=
#alfresco.content.tracker.corePoolSize=
#alfresco.content.tracker.maximumPoolSize=
#alfresco.content.tracker.keepAliveTime=
#alfresco.content.tracker.threadPriority=
#alfresco.content.tracker.threadDaemon=
#alfresco.content.tracker.workQueueSize=
#Metadata tracker config
#alfresco.metadata.tracker.cron=
#alfresco.metadata.tracker.corePoolSize=
#alfresco.metadata.tracker.maximumPoolSize=
#alfresco.metadata.tracker.keepAliveTime=
#alfresco.metadata.tracker.threadPriority=
#alfresco.metadata.tracker.threadDaemon=
#alfresco.metadata.tracker.workQueueSize=



# HTTP Client

alfresco.maxTotalConnections=200
alfresco.maxHostConnections=200
alfresco.socketTimeout=360000

# SOLR caching

solr.filterCache.size=256
solr.filterCache.initialSize=128
solr.queryResultCache.size=1024
solr.queryResultCache.initialSize=1024
solr.documentCache.size=1024
solr.documentCache.initialSize=1024
solr.queryResultMaxDocsCached=2048

solr.authorityCache.size=128
solr.authorityCache.initialSize=64
solr.pathCache.size=256
solr.pathCache.initialSize=128

solr.ownerCache.size=128
solr.ownerCache.initialSize=64

solr.readerCache.size=128
solr.readerCache.initialSize=64

solr.deniedCache.size=128
solr.deniedCache.initialSize=64

# SOLR

solr.maxBooleanClauses=10000

# Batch fetch

alfresco.transactionDocsBatchSize=500
alfresco.nodeBatchSize=100
alfresco.changeSetAclsBatchSize=500
alfresco.aclBatchSize=100
alfresco.contentReadBatchSize=100
alfresco.contentUpdateBatchSize=1000

# Warming

solr.filterCache.autowarmCount=32
solr.authorityCache.autowarmCount=4
solr.pathCache.autowarmCount=32
solr.deniedCache.autowarmCount=0
solr.readerCache.autowarmCount=0
solr.ownerCache.autowarmCount=0
solr.queryResultCache.autowarmCount=4
solr.documentCache.autowarmCount=512

solr.queryResultWindowSize=512

alfresco.doPermissionChecks=true

# Evaluate permissions as a PostFilter. Setting this to false will evaluate permissions as a Query.

alfresco.postfilter=true

#
# Metadata pulling control
#
alfresco.metadata.skipDescendantDocsForSpecificTypes=false
alfresco.metadata.ignore.datatype.0=cm:person
alfresco.metadata.ignore.datatype.1=app:configurations
alfresco.metadata.skipDescendantDocsForSpecificAspects=false
#alfresco.metadata.ignore.aspect.0=

alfresco.topTermSpanRewriteLimit=1000

#
# Suggestions
#
solr.suggester.enabled=true
# -1 to disable suggester build throttling
solr.suggester.minSecsBetweenBuilds=3600

#
# Limit the maximum text size of transformed content sent to the index - in bytes
#
alfresco.contentStreamLimit=10000000
#Shard setup
shard.method=DB_ID
#END of solrcore
<alfresco-search-services>/solr.in.sh:
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

# Settings here will override settings in existing env vars or in bin/solr.  The default shipped state
# of this file is completely commented.

# By default the script will use JAVA_HOME to determine which java
# to use, but you can set a specific path for Solr to use without
# affecting other Java applications on your server/workstation.
#SOLR_JAVA_HOME=""

# This controls the number of seconds that the solr script will wait for
# Solr to stop gracefully or Solr to start.  If the graceful stop fails,
# the script will forcibly stop Solr.  If the start fails, the script will
# give up waiting and display the last few lines of the logfile.
#SOLR_STOP_WAIT="180"

# Increase Java Heap as needed to support your indexing / query needs
#SOLR_HEAP="512m"

# Expert: If you want finer control over memory options, specify them directly
# Comment out SOLR_HEAP if you are using this though, that takes precedence
SOLR_JAVA_MEM="-Xms1g -Xmx1g"

# These GC settings have shown to work well for a number of common Solr workloads
#GC_TUNE="-XX:NewRatio=3 -XX:SurvivorRatio=4    etc.

# Set the ZooKeeper connection string if using an external ZooKeeper ensemble
# e.g. host1:2181,host2:2181/chroot
# Leave empty if not using SolrCloud
#ZK_HOST=""

# Set the ZooKeeper client timeout (for SolrCloud mode)
#ZK_CLIENT_TIMEOUT="15000"

# By default the start script uses "localhost"; override the hostname here
# for production SolrCloud environments to control the hostname exposed to cluster state
#SOLR_HOST="192.168.1.1"

# By default the start script uses UTC; override the timezone if needed
#SOLR_TIMEZONE="UTC"

# Set to true to activate the JMX RMI connector to allow remote JMX client applications
# to monitor the JVM hosting Solr; set to "false" to disable that behavior
# (false is recommended in production environments)
#ENABLE_REMOTE_JMX_OPTS="false"

# The script will use SOLR_PORT+10000 for the RMI_PORT or you can set it here
# RMI_PORT=18983

# Alfresco configuration. This file is automatically included by solr. You can define your custom settings here
SOLR_OPTS="$SOLR_OPTS -Dsolr.jetty.request.header.size=1000000 -Dsolr.jetty.threads.stop.timeout=300000 -Ddisable.configEdit=true"

# Anything you add to the SOLR_OPTS variable will be included in the java
# start command line as-is, in ADDITION to other options. If you specify the
# -a option on start script, those options will be appended as well. Examples:
#SOLR_OPTS="$SOLR_OPTS -Dsolr.autoSoftCommit.maxTime=3000"
#SOLR_OPTS="$SOLR_OPTS -Dsolr.autoCommit.maxTime=60000"
#SOLR_OPTS="$SOLR_OPTS -Dsolr.clustering.enabled=true"

# Location where the bin/solr script will save PID files for running instances
# If not set, the script will create PID files in $SOLR_TIP/bin
#SOLR_PID_DIR=

# Path to a directory for Solr to store cores and their data. By default, Solr will use server/solr
# If solr.xml is not stored in ZooKeeper, this directory needs to contain solr.xml
#SOLR_HOME=

# Solr provides a default Log4J configuration properties file in server/resources
# however, you may want to customize the log settings and file appender location
# so you can point the script to use a different log4j.properties file
#LOG4J_PROPS=/var/solr/log4j.properties

# Changes the logging level. Valid values: ALL, TRACE, DEBUG, INFO, WARN, ERROR, FATAL, OFF. Default is INFO
# This is an alternative to changing the rootLogger in log4j.properties
#SOLR_LOG_LEVEL=INFO

# Location where Solr should write logs to. Absolute or relative to solr start dir
SOLR_LOGS_DIR=../../logs
LOG4J_PROPS=$SOLR_LOGS_DIR/log4j.properties

# Enables log rotation, cleanup, and archiving during start. Setting SOLR_LOG_PRESTART_ROTATION=false will skip start
# time rotation of logs, and the archiving of the last GC and console log files. It does not affect Log4j configuration.
# This pre-startup rotation may need to be disabled depending how much you customize the default logging setup.
#SOLR_LOG_PRESTART_ROTATION=true

# Sets the port Solr binds to, default is 8983
#SOLR_PORT=8983

# Uncomment to set SSL-related system properties
# Be sure to update the paths to the correct keystore for your environment
SOLR_SSL_KEY_STORE=/opt/alfresco-community-201911/alfresco-search-services/solrhome/keystore/ssl-repo-client.keystore
SOLR_SSL_KEY_STORE_PASSWORD=keystore
SOLR_SSL_KEY_STORE_TYPE=JCEKS
SOLR_SSL_TRUST_STORE=/opt/alfresco-community-201911/alfresco-search-services/solrhome/keystore/ssl-repo-client.truststore
SOLR_SSL_TRUST_STORE_PASSWORD=truststore
SOLR_SSL_TRUST_STORE_TYPE=JCEKS
SOLR_SSL_NEED_CLIENT_AUTH=true
SOLR_SSL_WANT_CLIENT_AUTH=false

# Uncomment if you want to override previously defined SSL values for HTTP client
# otherwise keep them commented and the above values will automatically be set for HTTP clients
#SOLR_SSL_CLIENT_KEY_STORE=
#SOLR_SSL_CLIENT_KEY_STORE_PASSWORD=
#SOLR_SSL_CLIENT_KEY_STORE_TYPE=
#SOLR_SSL_CLIENT_TRUST_STORE=
#SOLR_SSL_CLIENT_TRUST_STORE_PASSWORD=
#SOLR_SSL_CLIENT_TRUST_STORE_TYPE=

# Settings for authentication
# Please configure only one of SOLR_AUTHENTICATION_CLIENT_CONFIGURER or SOLR_AUTH_TYPE parameters
#SOLR_AUTHENTICATION_CLIENT_CONFIGURER="org.apache.solr.client.solrj.impl.PreemptiveBasicAuthConfigurer"
#SOLR_AUTH_TYPE="basic"
#SOLR_AUTHENTICATION_OPTS="-Dbasicauth=solr:SolrRocks"
The command I use to run new instance:
./solr start -a "-Dcreate.alfresco.defaults=alfresco,archive -Dsolr.ssl.checkPeerName=false -Dsolr.allow.unsafe.resourceloading=true -Dssl-keystore.password=keystore -Dssl-keystore.aliases=ssl-alfresco-ca,ssl-repo-client -Dssl-keystore.ssl-alfresco-ca.password=keystore -Dssl-keystore.ssl-repo-client.password=keystore -Dssl-truststore.password=truststore -Dssl-truststore.aliases=ssl-alfresco-ca,ssl-repo,ssl-repo-client -Dssl-truststore.ssl-alfresco-ca.password=truststore -Dssl-truststore.ssl-repo.password=truststore -Dssl-truststore.ssl-repo-client.password=truststore" -f -force
But I get this error:
2021-02-04 14:32:35.710 INFO  (main) [   ] o.e.j.s.Server jetty-9.3.14.v20161028
2021-02-04 14:32:36.523 INFO  (main) [   ] o.a.s.s.SolrDispatchFilter  ___      _       Welcome to Apache Solr™ version 6.6.5-patched a77dde61f5121c726afb0e50a8e34ebba88534a4 - build - 2018-10-26 16:24:31
2021-02-04 14:32:36.524 INFO  (main) [   ] o.a.s.s.SolrDispatchFilter / __| ___| |_ _   Starting in standalone mode on port 8983
2021-02-04 14:32:36.524 INFO  (main) [   ] o.a.s.s.SolrDispatchFilter \__ \/ _ \ | '_|  Install dir: /opt/alfresco-community-201911/alfresco-search-services/solr
2021-02-04 14:32:36.540 INFO  (main) [   ] o.a.s.s.SolrDispatchFilter |___/\___/_|_|    Start time: 2021-02-04T14:32:36.525880Z
2021-02-04 14:32:37.760 INFO  (main) [   ] o.e.j.s.Server Started @3146ms
2021-02-04 14:32:47.543 WARN  (Thread-12) [   x:alfresco] o.a.s.c.Config XML parse warning in "solrres:/solrconfig.xml", line 1919, column 88: Include operation failed, reverting to fallback. Resource error reading file as XML (href='solrconfig_insight.xml'). Reason: Can't find resource 'solrconfig_insight.xml' in classpath or '/opt/alfresco-community-201911/alfresco-search-services/solrhome/alfresco'
2021-02-04 14:32:48.461 WARN  (Thread-12) [   x:alfresco] o.a.s.c.SolrResourceLoader Solr loaded a deprecated plugin/analysis class [org.apache.solr.analysis.WordDelimiterFilterFactory]. Please consult documentation how to replace it accordingly.
2021-02-04 14:32:48.479 WARN  (Thread-12) [   x:alfresco] o.a.s.c.SolrResourceLoader Solr loaded a deprecated plugin/analysis class [solr.SynonymFilterFactory]. Please consult documentation how to replace it accordingly.
2021-02-04 14:32:50.088 WARN  (Thread-12) [   x:alfresco] o.a.s.h.c.AlfrescoSolrClusteringComponent No default engine for document clustering.
2021-02-04 14:32:50.307 WARN  (Thread-12) [   x:alfresco] o.a.s.c.Config XML parse warning in "solrres:/solrconfig.xml", line 1919, column 88: Include operation failed, reverting to fallback. Resource error reading file as XML (href='solrconfig_insight.xml'). Reason: Can't find resource 'solrconfig_insight.xml' in classpath or '/opt/alfresco-community-201911/alfresco-search-services/solrhome/archive'
2021-02-04 14:32:50.729 WARN  (Thread-12) [   x:alfresco] o.a.s.h.c.AlfrescoSolrClusteringComponent No default engine for document clustering.
2021-02-04 14:32:50.866 ERROR (searcherExecutor-21-thread-1-processing-x:alfresco) [   x:alfresco] o.a.s.c.SolrCore null:org.alfresco.error.AlfrescoRuntimeException: 01040000 Failed to initialize keystore:
   Location: /opt/alfresco-community-201911/alfresco-search-services/solrhome/keystore/ssl-repo-client.keystore
   Provider:
   Type:     JCEKS
        at org.alfresco.encryption.AlfrescoKeyStoreImpl.loadKeyStore(AlfrescoKeyStoreImpl.java:576)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl.safeInit(AlfrescoKeyStoreImpl.java:543)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl.<init>(AlfrescoKeyStoreImpl.java:110)
        at org.alfresco.httpclient.HttpClientFactory.init(HttpClientFactory.java:150)
        at org.alfresco.httpclient.HttpClientFactory.<init>(HttpClientFactory.java:145)
        at org.alfresco.solr.client.SOLRAPIClientFactory.getRepoClient(SOLRAPIClientFactory.java:193)
        at org.alfresco.solr.client.SOLRAPIClientFactory.getSOLRAPIClient(SOLRAPIClientFactory.java:174)
        at org.alfresco.solr.lifecycle.SolrCoreLoadRegistration.registerForCore(SolrCoreLoadRegistration.java:73)
        at org.alfresco.solr.lifecycle.SolrCoreLoadListener.newSearcher(SolrCoreLoadListener.java:44)
        at org.apache.solr.core.SolrCore.lambda$getSearcher$15(SolrCore.java:2249)
        at java.base/java.util.concurrent.FutureTask.run(FutureTask.java:264)
        at org.apache.solr.common.util.ExecutorUtil$MDCAwareThreadPoolExecutor.lambda$execute$0(ExecutorUtil.java:229)
        at java.base/java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1128)
        at java.base/java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:628)
        at java.base/java.lang.Thread.run(Thread.java:830)
Caused by: java.io.IOException: Is a directory
        at java.base/sun.nio.ch.FileDispatcherImpl.read0(Native Method)
        at java.base/sun.nio.ch.FileDispatcherImpl.read(FileDispatcherImpl.java:48)
        at java.base/sun.nio.ch.IOUtil.readIntoNativeBuffer(IOUtil.java:276)
        at java.base/sun.nio.ch.IOUtil.read(IOUtil.java:245)
        at java.base/sun.nio.ch.FileChannelImpl.read(FileChannelImpl.java:223)
        at java.base/sun.nio.ch.ChannelInputStream.read(ChannelInputStream.java:65)
        at java.base/sun.nio.ch.ChannelInputStream.read(ChannelInputStream.java:109)
        at java.base/sun.nio.ch.ChannelInputStream.read(ChannelInputStream.java:103)
        at java.base/java.io.InputStream.read(InputStream.java:213)
        at java.base/java.util.Properties$LineReader.readLine(Properties.java:500)
        at java.base/java.util.Properties.load0(Properties.java:416)
        at java.base/java.util.Properties.load(Properties.java:405)
        at org.alfresco.solr.SolrKeyResourceLoader.loadKeyMetaData(SolrKeyResourceLoader.java:64)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl$KeyInfoManager.loadKeyMetaData(AlfrescoKeyStoreImpl.java:1031)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl$KeyInfoManager.<init>(AlfrescoKeyStoreImpl.java:1013)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl.getKeyInfoManager(AlfrescoKeyStoreImpl.java:401)
        at org.alfresco.encryption.AlfrescoKeyStoreImpl.loadKeyStore(AlfrescoKeyStoreImpl.java:566)
        ... 14 more
It basically says, that my defined path for keystore points to a directory instead of a file which makes no sense to me. I've tried to move the keystore file in other directories or use configuration with some random path, but I always get this same error so it seems that "alfresco.encryption.ssl.keystore.location" in "solrcore.properties" has no impact on this error. I wonder if there is some wrong configuration in my files or some other problem, but I've double checked every step from the guide and I'm stucked now. I will be very grateful for any help.
0 REPLIES 0