topic Re: Tomcat stop issue in Alfresco Forum

Tomcat stop issue

alessio86 — Thu, 25 Jan 2018 16:06:48 GMT

Hi all,I'm facing an issue with tomcat. When I want to stop/restart the alfresco (community 5+) I've got this message:Tomcat did not stop in time.To aid diagnostics a thread dump has been written to standard out.Killing Tomcat with the PID: 4294The Tomcat process has been killed../ctl.sh : tomcat st

Re: Tomcat stop issue

mehe — Fri, 26 Jan 2018 11:04:06 GMT

Hi Alessio,

I run several repos und Linux with Versions from 3.4 to 5+ and this problem exists from the beginning until now.

Tomcat gets his stop signal, but is not able to stop all the threads. I you don't configure the "kill" timeout too short, this is not a problem. Alfresco will startup without problems after the kill.

I use 3min sleep for test-systems and 5 to 10 min for production - cannot remember the original timeout...

The timeout is configured in the tomcat start/stop script (Linux: .../tomcat/scripts/ctl.sh)

Re: Tomcat stop issue

alessio86 — Fri, 26 Jan 2018 11:15:39 GMT

Thank you Martin!

Re: Tomcat stop issue

cesarista — Fri, 26 Jan 2018 13:54:03 GMT

Hi:

If you don't have enough patience or if it simply does not stop in any case (if you waited enough) , you may Crtl-Z and do "sh alfresco.sh stop" again. It will directly kill the alfresco process.

Regards.

--C.

Re: Tomcat stop issue

kintu_barot — Mon, 29 Jan 2018 04:41:16 GMT

Hi Alessio Izzo,

According to Cesar's answer, running 'sh alfresco.sh stop' again will force your OS to stop the servers, and that is the correct way to do it rather than killing the process manually.

Regards,

Kintu

ContCentric

Re: Tomcat stop issue

mehe — Mon, 29 Jan 2018 06:15:20 GMT

It was no discussion about killing the tomcat container manually (its about configuring the tomcat ctl,sh which is called by alfresco.sh) - but in the end, that's what the stop script does - kill -9 if everything else (other kill signals) is not working and it's no difference if you do that manually after some time or let the stop-script do it...

With the configuration of the timeout IN the alfresco stop script, we want to force tomcat down in just a shorter amount of time, so you don't have to wait for 15 minutes, when restarting a test system.