topic Re: salut a toute la compagnieje suis nouveau sur alfresco... in Alfresco Archive

salut a toute la compagnieje suis nouveau sur alfresco...

dakylla — Mon, 12 Nov 2007 16:52:19 GMT

salut a toute la compagnieje suis nouveau sur alfresco et je cherche a le configurer pour kerberos/ADj'ai l'erreur suivante (j'ai mis une bonne partie du debut du log serveur que vous ayez une vision plus large du probleme : 17:29:43,093 INFO [org.alfresco.repo.node.index.FullIndexRecoveryCompon

Re: salut a toute la compagnieje suis nouveau sur alfresco...

lme — Tue, 13 Nov 2007 07:57:18 GMT

Bonjour,

Je ne vais pas pouvoir beaucoup t'aider au sujet de Kerberos (désolé ). Mais je suis curieux et j'ai une petite question à te poser : tu sembles préférer Kerberos à NTLM pour l'authentification sur l'AD, y a-t-il une raison particulière à cela ?

Re: salut a toute la compagnieje suis nouveau sur alfresco...

dakylla — Tue, 13 Nov 2007 08:48:43 GMT

salut, en fait il n'y a pas de raisons particulieres, je cherche juste une solution qui marche car la configuration d'alfrezsco c pas du gateau. donc, en retour, si toi tu px m'aider sur de l'auth meme NTLM , ya pas de problemes .

Re: salut a toute la compagnieje suis nouveau sur alfresco...

lme — Tue, 13 Nov 2007 10:08:24 GMT

Tout est expliqué ici pour le NTLM : http://wiki.alfresco.com/wiki/Configuring_NTLM

Re: salut a toute la compagnieje suis nouveau sur alfresco...

dakylla — Thu, 15 Nov 2007 10:49:22 GMT

Tout est expliqué ici pour le NTLM : http://wiki.alfresco.com/wiki/Configuring_NTLM

oui, c bien ce howto que j'aio suivi, mais je reprends tt de zero en esperant que ca aille
merci qd meme, je vous tiendrait au courant

EDIT
je vx dire apres apres tenter l'authentification sur Kerberos

Re: salut a toute la compagnieje suis nouveau sur alfresco...

huberd — Thu, 15 Nov 2007 11:02:20 GMT

En faite c'est tout simple, je te donne les fichiers de configuration pour l'authentification NTLM transparente pour l'utilisateur.

Plusieurs fichiers doivent être modifiés ou créé comme suit :

fichier webappsalfrescoWEB-INFweb.xml (modification)

   <filter>
      <filter-name>Authentication Filter</filter-name>
      <!– <filter-class>org.alfresco.web.app.servlet.AuthenticationFilter</filter-class> –>
      
      <!– For Novell IChain support use the following filter –>
      <!–
        <filter-class>org.alfresco.web.app.servlet.NovellIChainsHTTPRequestAuthenticationFilter</filter-class>
      –>
      
      <!– For NTLM authentication support use the following filter –>

        <filter-class>org.alfresco.web.app.servlet.NTLMAuthenticationFilter</filter-class>

   </filter>

   <filter>
      <filter-name>WebDAV Authentication Filter</filter-name>
      <!– <filter-class>org.alfresco.repo.webdav.auth.AuthenticationFilter</filter-class> –>
      
      <!– For NTLM authentication support use the following filter –>

        <filter-class>org.alfresco.repo.webdav.auth.NTLMAuthenticationFilter</filter-class>

   </filter>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

fichier sharedclassesalfrescoextensionntlm-authentication-context.xml (création)-> Alfresco Version 2.1 uniquement

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE beans PUBLIC '-//SPRING//DTD BEAN//EN' 'http://www.springframework.org/dtd/spring-beans.dtd'>

<beans>

    <bean id="authenticationDao" class="org.alfresco.repo.security.authentication.ntlm.NullMutableAuthenticationDao">
       <property name="nodeService">
           <ref bean="nodeService" />
       </property>
    </bean>

    <!– The authentication component.                                      –>

    <!– Use the passthru authentication component to authenticate using    –>
    <!– user accounts on one or more Windows servers.                      –>
    
    <!– Properties that specify the server(s) to use for passthru          –>
    <!– authentication :-                                                  –>
    <!–   useLocalServer   use the local server for authentication         –>
    <!–   domain           use domain controllers from the specified domain–>
    <!–   servers          comma delimted list of server addresses or      –>
    <!–                    names                                           –>
       
    <bean id="authenticationComponent" class="org.alfresco.repo.security.authentication.ntlm.NTLMAuthenticationComponentImpl">
        <property name="servers">
            <value>DOMAINIP_DU_CONTROLEUR,DOMAINNOM_DU_CONTRLEUR</value>
        </property>
        <property name="personService">
            <ref bean="personService" />
        </property>
        <property name="nodeService">
            <ref bean="nodeService" />
        </property>
        <property name="transactionService">
            <ref bean="transactionComponent" />
        </property>
        <property name="guestAccess">
            <value>false</value>
        </property>
    </bean>
    
</beans>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Ces opérations ne sont valables que pour la version 2.1 d'Alfresco.

Pour la version 2.0, il te faudra recompiler la classe NTLM (NTLMAuthenticationFilter.java) avec Eclipse que tu pourras trouver ici https://svn.alfresco.com/repos/alfresco-open-mirror/alfresco/HEAD/root/projects/web-client/source/java/org/alfresco/web/app/servlet/NTLMAuthenticationFilter.java .

fichier sharedclassesalfrescoextensionntlm-authentication-context.xml (création)-> Alfresco Version 2.0 uniquement

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE beans PUBLIC '-//SPRING//DTD BEAN//EN' 'http://www.springframework.org/dtd/spring-beans.dtd'>

<beans>

    <bean id="authenticationDao" class="org.alfresco.repo.security.authentication.ntlm.NullMutableAuthenticationDao">
       <property name="nodeService">
           <ref bean="nodeService" />
       </property>
    </bean>

    <!– The authentication component.                                      –>

    <!– Use the passthru authentication component to authenticate using    –>
    <!– user accounts on one or more Windows servers.                      –>
    
    <!– Properties that specify the server(s) to use for passthru          –>
    <!– authentication :-                                                  –>
    <!–   useLocalServer   use the local server for authentication         –>
    <!–   domain           use domain controllers from the specified domain–>
    <!–   servers          comma delimted list of server addresses or      –>
    <!–                    names                                           –>
       
    <bean id="authenticationComponent" class="org.alfresco.repo.security.authentication.ntlm.NTLMAuthenticationComponentImpl">
        <property name="servers">
            <value>IP_DU_CONTROLEUR,NOM_DU_CONTROLEUR</value>
        </property>
        <property name="personService">
            <ref bean="personService" />
        </property>
        <property name="nodeService">
            <ref bean="nodeService" />
        </property>
        <property name="guestAccess">
            <value>false</value>
        </property>
    </bean>
    
</beans>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Re: salut a toute la compagnieje suis nouveau sur alfresco...

huberd — Thu, 15 Nov 2007 11:16:50 GMT

Une fois que tu auras permis aux utilisateurs de pouvoir se connecter à Alfresco via leur comptes Windows, tu devra être également en mesure de synchroniser l'ensemble des comptes et groupes via l'Active Directory en créant ou modifiant le fichier ldap-authentication-context.xml comme suit :

fichier sharedclassesalfrescoextensionldap-authentication-context.xml

<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE beans PUBLIC '-//SPRING//DTD BEAN//EN' 'http://www.springframework.org/dtd/spring-beans.dtd'>

<beans>
    
    <!– DAO that rejects changes - LDAP is read only at the moment. It does allow users to be deleted with out warnings from the UI. –>
    
    <bean name="authenticationDao" class="org.alfresco.repo.security.authentication.DefaultMutableAuthenticationDao" >
        <property name="allowDeleteUser">
            <value>true</value>
        </property>
    </bean>    
   

    <!– LDAP authentication configuration –>
    
    <!– 
    
    You can also use JAAS authentication for Kerberos against Active Directory or NTLM if you also require single sign on from the
    web browser. You do not have to use LDAP authentication to synchronise groups and users from an LDAP store if it supports other
    authentication routes, like Active Directory.
    
    –>
    
    <bean id="authenticationComponent" class="org.alfresco.repo.security.authentication.ldap.LDAPAuthenticationComponentImpl">
        <property name="LDAPInitialDirContextFactory">
            <ref bean="ldapInitialDirContextFactory"/>
        </property>
        <property name="userNameFormat">
            <!–
            
            This maps between what the user types in and what is passed through to the underlying LDAP authentication.
            
            "%s" - the user id is passed through without modification.
            Used for LDAP authentication such as DIGEST-MD5, anything that is not "simple".
            
            "cn=%s,ou=London,dc=company,dc=com" - If the user types in "Joe Bloggs" the authentricate as "cn=Joe Bloggs,ou=London,dc=company,dc=com" 
            Usually for simple authentication.
            
            –>
            <!– <value>samaccountname=%s</value> –>
            <value>%s</value>
        </property>
    </bean>
    
    <!–
    
    This bean is used to support general LDAP authentication. It is also used to provide read only access to users and groups
    to pull them out of the LDAP reopsitory
    
    –>
    
    <bean id="ldapInitialDirContextFactory" class="org.alfresco.repo.security.authentication.ldap.LDAPInitialDirContextFactoryImpl">
        <property name="initialDirContextEnvironment">
            <map>
                <!– The LDAP provider –>
                <entry key="java.naming.factory.initial">
                    <value>com.sun.jndi.ldap.LdapCtxFactory</value>
                </entry>
                
                <!– The url to the LDAP server –>
                <!– Note you can use space separated urls - they will be tried in turn until one works –>
                <!– This could be used to authenticate against one or more ldap servers (you will not know which one ….) –>
                <entry key="java.naming.provider.url">
                    <value>ldap://NOM_DU_CONTROLEUR:389</value>
                </entry>
                
                <!– The authentication mechanism to use      –>
                <!– Some sasl authentication mechanisms may require a realm to be set –>
                <!–                java.naming.security.sasl.realm –>
                <!– The available options will depend on your LDAP provider –>
                <entry key="java.naming.security.authentication">
                    <value>simple</value>
                </entry>
                
                <!– The id of a user who can read group and user information –>
                <!– This does not go through the pattern substitution defined above and is used "as is" –>
                <entry key="java.naming.security.principal">
                    <value>cn=myldapuser,cn=users,dc=mycompany,dc=fr</value>
                </entry>
                
                <!– The password for the user defined above –>
                <entry key="java.naming.security.credentials">
                    <value>myldappassword</value>
                </entry>
            </map>
        </property>
    </bean>
    
    <!– Ldap Syncronisation support –>
    
    <!– 
        
    There can be more than one stack of beans that import users or groups. For example, it may be easier
    to have a version of ldapPeopleExportSource, and associated beans, for each sub-tree of your ldap directory
    from which you want to import users. You could then limit users to be imported from two or more sub tress and ignore 
    users found else where. The same applies to the import of groups. 
         
    The defaults shown below are for OpenLDAP.    
        
    –>
        
   
    <!– Extract user information from LDAP and transform this to XML –>
     
    <bean id="ldapPeopleExportSource" class="org.alfresco.repo.security.authentication.ldap.LDAPPersonExportSource">
        <!– 
        The query to select objects that represent the users to import.
        
        For Open LDAP, using a basic schema, the following is probably what you want:
        (objectclass=inetOrgPerson)
        
        For Active Directory:
        (objectclass=user)
        –>
        <property name="personQuery">
            <value><![CDATA[(&&#40;givenName=*)(sn=*)(mail=*)(company=*))]]></value>
        </property>
        
        <!–
        The seach base restricts the LDAP query to a sub section of tree on the LDAP server.
        –>
        <property name="searchBase">
            <value>dc=mycompany,dc=fr</value>
        </property>
        
        <!–
        The unique identifier for the user.
        
        THIS MUST MATCH WHAT THE USER TYPES IN AT THE LOGIN PROMPT    
        
        For simple LDAP authentication this is likely to be "cn" or, less friendly, "distinguishedName"
        
        In OpenLDAP, using other authentication mechanisms "uid", but this depends on how you map
        from the id in the LDAP authentication request to search for the inetOrgPerson against which
        to authenticate.
        
        In Active Directory this is most likely to be "sAMAccountName" 
        
        This property is mandatory and must appear on all users found by the query defined above.
        
        –>
        <property name="userIdAttributeName">
            <value>samaccountname</value>
        </property>
        
        <!– Services –>
        <property name="LDAPInitialDirContextFactory">
            <ref bean="ldapInitialDirContextFactory"/>
        </property>
        <property name="personService">
            <ref bean="personService"></ref>
        </property>
        <property name="namespaceService">
            <ref bean="namespaceService"/>
        </property>
        
        <!–
        This property defines a mapping between attributes held on LDAP user objects and
        the properties of user objects held in the repository. The key is the QName of an attribute in
        the repository, the value is the attribute name from the user/inetOrgPerson/.. object in the
        LDAP repository.     
        –>
        <property name="attributeMapping">
            <map>
                <entry key="cm:userName">
                    <!– Must match the same attribute as userIdAttributeName –>
                    <value>samaccountname</value>
                </entry>
                <entry key="cm:firstName">
                    <!– OpenLDAP: "givenName" –>
                    <!– Active Directory: "givenName" –>
                    <value>givenName</value>
                </entry>
                <entry key="cm:lastName">
                    <!– OpenLDAP: "sn" –>
                    <!– Active Directory: "sn" –>
                    <value>sn</value>
                </entry>
                <entry key="cm:email">
                    <!– OpenLDAP: "mail" –>
                    <!– Active Directory: "???" –>
                    <value>mail</value>
                </entry>
                <entry key="cm:organizationId">
                    <!– OpenLDAP: "o" –>
                    <!– Active Directory: "???" –>
                    <value>company</value>
                </entry>
                <!– Always use the default –>
                <entry key="cm:homeFolderProvider">
                    <null/>
                </entry>
            </map>
        </property>
        <!– Set a default home folder provider –>
        <!– Defaults only apply for values above –>
        <property name="attributeDefaults">
            <map>
                <entry key="cm:homeFolderProvider">
                    <!– <value>personalHomeFolderProvider</value> –>
                    <value>userHomesHomeFolderProvider</value>
                </entry>
            </map>
        </property>
    </bean>
    
    <!– Extract group information from LDAP and transform this to XML –>
    
    <bean id="ldapGroupExportSource" class="org.alfresco.repo.security.authentication.ldap.LDAPGroupExportSource">
        <!–
        The query to select objects that represent the groups to import.
        
        For Open LDAP, using a basic schema, the following is probably what you want:
        (objectclass=groupOfNames)
        
        For Active Directory:
        (objectclass=group)
        –>
        <property name="groupQuery">
            <!–value>(objectclass=group)</value> –>
            <value><![CDATA[(&&#40;objectclass=group)(|(cn=A_*)(cn=BEN-*)(cn=FRA-*)(cn=GRP-*)(cn=IBM-*)(cn=POR-*)(cn=MAD-*)(cn=SPA-*)(cn=UK-*)))]]></value>
        </property>
        
        <!–
        The seach base restricts the LDAP query to a sub section of tree on the LDAP server.
        –>
        <property name="searchBase">
            <!–value>ou=Groups,ou=Alfresco,ou=Applications,dc=mycompany,dc=fr</value> –>
            <value>dc=mycompany,dc=fr</value>
        </property>
        
        <!–
        The unique identifier for the user. This must match the userIdAttributeName on the ldapPeopleExportSource bean above.
        –>
        <property name="userIdAttributeName">
            <value>samaccountname</value>
        </property>
        
        <!–
        An attribute that is a unique identifier for each group found. 
        This is also the name of the group with the current group implementation.
        This is mandatory for any groups found.
        
        OpenLDAP: "cn" as it is mandatory on groupOfNames
        Active Directory: "cn"
        
        –>
        <property name="groupIdAttributeName">
            <value>cn</value>
        </property>
        
        <!– 
        The objectClass attribute for group members.
        For each member of a group, the distinguished name is given.
        The object is looked up by its DN. If the object is of this class it is treated as a group. 
        –>
        <property name="groupType">
            <value>group</value>
        </property>
        
        <!– 
        The objectClass attribute for person members.
        For each member of a group, the distinguished name is given.
        The object is looked up by its DN. If the object is of this class it is treated as a person. 
        –>
        <property name="personType">
            <value>person</value>
        </property>
        <property name="LDAPInitialDirContextFactory">
            <ref bean="ldapInitialDirContextFactory"/>
        </property>
        <property name="namespaceService">
            <ref bean="namespaceService"/>
        </property>
        
        <!–
        The repeating attribute on group objects (found by query or as sub groups)
        used to define membership of the group. This is assumed to hold distinguished names of
        other groups or users/people; the above types are used to determine this.
        
        OpenLDAP: "member" as it is mandatory on groupOfNames
        Active Directory: "member"
        
        –>
        <property name="memberAttribute">
            <value>member</value>
        </property>
        
        <property name="authorityDAO">
            <ref bean="authorityDAO"/>
        </property>
    </bean>
    
    <!– Job definitions to import LDAP people and groups –>
    <!– The triggers register themselves with the scheduler –>
    <!– You may comment in the default scheduler to enable these triggers –>
    <!– If a cron base trigger is what you want seee scheduled-jobs-context.xml for examples. –>
    
    <!– Trigger to load poeple –>
    <!– Note you can have more than one initial (context, trigger, import job and export source) set –>
    <!– This would allow you to load people from more than one ldap store –>
    
    <bean id="ldapPeopleTrigger" class="org.alfresco.util.TriggerBean">
        <property name="jobDetail">
            <bean id="ldapPeopleJobDetail" class="org.springframework.scheduling.quartz.JobDetailBean">
                <property name="jobClass">
                    <value>org.alfresco.repo.importer.ImporterJob</value>
                </property>
                <property name="jobDataAsMap">
                    <map>
                        <entry key="bean">
                            <ref bean="ldapPeopleImport"/>
                        </entry>
                    </map>
                </property>
            </bean>
        </property>
        <!– Start after 60 secondes of starting the repository –>
        <property name="startDelay">
            <value>60</value>
        </property>
        <!– Repeat every hour –>
        <property name="repeatInterval">
            <value>3600000</value>
        </property>
        <!– Commented out to disable –>
        <property name="scheduler">
            <ref bean="schedulerFactory" />
        </property>

    </bean>
    
    <bean id="ldapGroupTrigger" class="org.alfresco.util.TriggerBean">
        <property name="jobDetail">
            <bean id="ldapGroupJobDetail" class="org.springframework.scheduling.quartz.JobDetailBean">
                <property name="jobClass">
                    <value>org.alfresco.repo.importer.ImporterJob</value>
                </property>
                <property name="jobDataAsMap">
                    <map>
                        <entry key="bean">
                            <ref bean="ldapGroupImport"/>
                        </entry>
                    </map>
                </property>
            </bean>
        </property>
        <!– Start after 60 secondes of starting the repository –>
        <property name="startDelay">
            <value>60</value>
        </property>
        <!– Repeat every hour –>
        <property name="repeatInterval">
            <value>3600000</value>
        </property>
        <!– Commented out to disable –>
        <property name="scheduler">
            <ref bean="schedulerFactory" />
        </property>
 
    </bean>
    
    <!– The bean that imports xml describing people –>
    
    <bean id="ldapPeopleImport" class="org.alfresco.repo.importer.ExportSourceImporter">
        <property name="importerService">
            <ref bean="importerComponentWithBehaviour"/>
        </property>
        <property name="transactionService">
            <ref bean="transactionComponent"/>
        </property>
        <property name="authenticationComponent">
            <ref bean="authenticationComponent"/>
        </property>
        <property name="exportSource">
            <ref bean="ldapPeopleExportSource"/>
        </property>

        <!– The store that contains people - this should not be changed –>
        <property name="storeRef">
            <value>${spaces.store}</value>
        </property>
        
        <!– The location of people nodes within the store defined above - this should not be changed –>
        <property name="path">
            <value>/${system.system_container.childname}/${system.people_container.childname}</value>
        </property>
        
        <!– If true, clear all existing people before import, if false update/add people from the xml –>
        <property name="clearAllChildren">
            <value>false</value>
        </property>
        <property name="nodeService">
            <ref bean="nodeService"/>
        </property>
        <property name="searchService">
            <ref bean="searchService"/>
        </property>
        <property name="namespacePrefixResolver">
            <ref bean="namespaceService"/>
        </property>
        
        
        <property name="caches">
            <set>
                <ref bean="permissionsAccessCache"/>
            </set>
        </property>
    </bean>
    
    <!– The bean that imports xml descibing groups –>
    
    <bean id="ldapGroupImport" class="org.alfresco.repo.importer.ExportSourceImporter">
        <property name="importerService">
            <ref bean="importerComponentWithBehaviour"/>
        </property>
        <property name="transactionService">
            <ref bean="transactionComponent"/>
        </property>
        <property name="authenticationComponent">
            <ref bean="authenticationComponent"/>
        </property>
        <property name="exportSource">
            <ref bean="ldapGroupExportSource"/>
        </property>
        <!– The store that contains group information - this should not be changed –>
        <property name="storeRef">
            <value>${alfresco_user_store.store}</value>
        </property>
        
        <!– The location of group information in the store above - this should not be changed –>
        <property name="path">
            <value>/${alfresco_user_store.system_container.childname}/${alfresco_user_store.authorities_container.childname}</value>
        </property>
        
        <!– If true, clear all existing groups before import, if false update/add groups from the xml –>
        <property name="clearAllChildren">
            <value>true</value>
        </property>
        <property name="nodeService">
            <ref bean="nodeService"/>
        </property>
        <property name="searchService">
            <ref bean="searchService"/>
        </property>
        <property name="namespacePrefixResolver">
            <ref bean="namespaceService"/>
        </property>
        
        <!– caches to clear on import of groups –>
        <property name="caches">
            <set>
                <ref bean="userToAuthorityCache"/>
                <ref bean="permissionsAccessCache"/>
            </set>
        </property>
        
        <!– userToAuthorityCache –>
    </bean>
    
</beans>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Pour les utilisateurs et groupes, j'utilise 2 filtres différents qui méritent que l'on s'y attarde un peu.

* Filtre Utilisateurs

        <property name="personQuery">
            <value><![CDATA[(&&#40;givenName=*)(sn=*)(mail=*)(company=*))]]></value>
        </property>‍‍‍

Cette requette me permet d'importer seulement les utilisateurs disposant d'un nom, d'un prénom, d'une adresse email et d'une companie. Les autres utilisateurs dont ces champs sont vide sont ignorés. Le filtre peut être adapté en fonction de tes besoins. Ne pas oublié d'encadré ta requette par <!CDATA[ Requette LDAP ]>

* Filtre de Groupes

        <property name="groupQuery">
            <!–value>(objectclass=group)</value> –>
            <value><![CDATA[(&&#40;objectclass=group)(|(cn=A_*)(cn=BEN-*)(cn=FRA-*)(cn=GRP-*)(cn=IBM-*)(cn=POR-*)(cn=MAD-*)(cn=SPA-*)(cn=UK-*)))]]></value>
        </property>‍‍‍‍

Cette requette me permet d'importer seulement les groupes dont le nom commence par A_ ou BEN- ou FRA-, … Les autres groupes sont ignorés. Le filtre peut être adapté en fonction de tes besoins. Ne pas oublié d'encadré ta requette par <!CDATA[ Requette LDAP ]>

Re: salut a toute la compagnieje suis nouveau sur alfresco...

huberd — Thu, 15 Nov 2007 11:34:35 GMT

Concernant CIFS, tu devras également modifié ou créé le fichier file-servers-custom.xml dans sharedclassesalfrescoextension comme suit.

fichier sharedclassesalfrescoextensionfile-servers-custom.xml Version pour Système d'exploitation Windows

<alfresco-config area="file-servers">

   <config evaluator="string-compare" condition="CIFS Server" replace="true">
     <serverEnable enabled="true"/>
      <host name="${localname}_A"/>
      <comment>Alfresco CIFS Server</comment>

      <!– Set to the broadcast mask for the subnet –>
      <broadcast>255.255.255.255</broadcast>

      <!– Use Java socket based NetBIOS over TCP/IP and native SMB on linux –>
      <tcpipSMB platforms="linux,solaris,macosx"/>
      <netBIOSSMB platforms="linux,solaris,macosx"/>

      <!– Can be mapped to non-privileged ports, then use firewall rules to forward
          requests from the standard ports –>
     <!–
      <tcpipSMB port="1445" platforms="linux,solaris,macosx"/>
      <netBIOSSMB sessionPort="1139" namePort="1137" datagramPort="1138" platforms="linux,solaris,macosx"/>
     –>

      <hostAnnounce interval="5"/>

      <!– Use Win32 NetBIOS interface on Windows –>
      <Win32NetBIOS/>
      <Win32Announce interval="5"/>

<!–
      <WINS>
         <primary>1.2.3.4</primary>
         <secondary>5.6.7.8</secondary>
      </WINS>
–>
      <sessionDebug flags="Negotiate,Socket"/>
   </config>

   <config evaluator="string-compare" condition="FTP Server" replace="true">
     <serverEnable enabled="true"/>
<!–      <debug flags="File,Search,Error,Directory,Info,DataPort"/> –>
   </config>

   <config evaluator="string-compare" condition="NFS Server">
     <serverEnable enabled="false"/>
   </config>

   <config evaluator="string-compare" condition="Filesystems" replace="true">
     <filesystems>

       <!– Alfresco repository access shared filesystem –>
         <filesystem name="Alfresco">
            <store>workspace://SpacesStore</store>
            <rootPath>/app:company_home</rootPath>

         <!– Add a URL file to each folder that links back to the web client –>
         <urlFile>
               <filename>__AlfrescoClient.url</filename>
               <webpath>http://${localname}:8080/alfresco/</webpath>
            </urlFile>

         <!– Mark locked files as offline –> 
          <offlineFiles/>

         <!– Desktop actions –>
         <!– Uses a client-side application to trigger a server-side action                         –>
         <!–   Echo - displays a message echoed from the server                                     –>
         <!–   URL  - launches a URL via the Windows shell                                          –>
         <!–   CmdLine - launches the Notepad application                                           –>
         <!–   CheckInOut - checks files in/out, drag and drop files onto the application           –>
         <!–   JavaScript - run a server-side script                                                –>
         <!–   JavaScriptURL - server-side script that generates a URL to the folder using a ticket –>
         <!–                   to avoid having to logon                                             –>

         <desktopActions>
            <global>
                    <path>alfresco/desktop/Alfresco.exe</path>
               <webpath>http://${localname}:8080/alfresco/</webpath>
            </global>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.EchoDesktopAction</class>
               <name>Echo</name>
                 <filename>__AlfrescoEcho.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.URLDesktopAction</class>
               <name>URL</name>
                 <filename>__AlfrescoURL.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.CmdLineDesktopAction</class>
               <name>CmdLine</name>
                 <filename>__AlfrescoCmd.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.CheckInOutDesktopAction</class>
               <name>CheckInOut</name>
                 <filename>__AlfrescoCheckInOut.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>
               <name>JavaScript</name>
               <filename>__AlfrescoScript.exe</filename>
               <script>alfresco/desktop/dumpRequest.js</script>
               <attributes>anyFiles, multiplePaths , allowNoParams</attributes>
               <preprocess>confirm, copyToTarget</preprocess>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>
               <name>JavaScriptURL</name>
               <filename>__AlfrescoDetails.exe</filename>
               <script>alfresco/desktop/showDetails.js</script>
               <attributes>anyFiles</attributes>
               <preprocess>copyToTarget</preprocess>
            </action>

         </desktopActions>
                    
<!–
            <accessControl default="Write">
               <user name="admin" access="Write"/>
               <address subnet="90.1.0.0" mask="255.255.0.0" access="Write"/>
            </accessControl>
–>
         </filesystem>
        
       <!– AVM virtualization view of all stores/versions for WCM –>
         <avmfilesystem name="AVM">
            <virtualView/>
         </avmfilesystem>
        
      </filesystems>
   </config>

   <config evaluator="string-compare" condition="Filesystem Security" replace="true">
      <authenticator type="alfresco">
       <Server>IP_DU_CONTROLEUR</Server>
       <Domain>DOMAIN</Domain>
      </authenticator>

<!–
      <globalAccessControl default="None">
         <user name="admin" access="Write"/>
         <address ip="90.1.0.90" access="Write"/>
      </globalAccessControl>

      <users>
         <localuser name="user">
            <password>user</password>
            <comment>Normal user account</comment>
         </localuser>
   
         <localuser name="administrator">
            <password>admin</password>
            <administrator/>
            <comment>Administrator account</comment>
         </localuser>
      </users>
–>
   </config>


</alfresco-config>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Pour configurer CIFS sur un serveur Linux où Samba et FTP sont déjà installés, tu devras modifier ta configuration samba pour qu'elle réponde sur une adresse IP et non sur toutes les adresses IP attribués à ta carte réseau.

Fichier de configuration Samba à modifier en ajoutant ou modifiant les paramètres suivants :

    socket address = AdresseIPsurLequelLeServeurSamabaDoitRépondre
    interfaces = VotreAdresseDeRéseau/VotreNetmask
    bind interfaces only = yes‍‍‍

Noublies pas de redémarrer Samba.

Ajoutes une adresse IP virtuelle sur ta machine Linux.

et modifié ou créé le fichier file-servers-custom.xml dans sharedclassesalfrescoextension comme suit.

fichier sharedclassesalfrescoextensionfile-servers-custom.xml Version pour Système d'exploitation Linux utilisant samba et FTP.

1) Ajouter la ligne <bindto>VotreAdresseIPVirtuelle</bindto> sous <broadcast>255.255.255.255</broadcast> dans la partie CIFS Server
2) Suprimer Linux de la ligne <netBIOSSMB platforms="solaris,macosx"/>
3) Ajouter la ligne <bindto>VotreAdresseIPVirtuelle</bindto> sous <serverEnable enabled="true"/> dans la partie FTP Server

<alfresco-config area="file-servers">

   <config evaluator="string-compare" condition="CIFS Server" replace="true">
     <serverEnable enabled="true"/>
      <host name="${localname}_A"/>
      <comment>Alfresco CIFS Server</comment>

      <!– Set to the broadcast mask for the subnet –>
      <broadcast>255.255.255.255</broadcast>
      <bindto>VotreAdresseIPVirtuelle</bindto>

      <!– Use Java socket based NetBIOS over TCP/IP and native SMB on linux –>
      <tcpipSMB platforms="linux,solaris,macosx"/>
      <netBIOSSMB platforms="solaris,macosx"/>

      <!– Can be mapped to non-privileged ports, then use firewall rules to forward
          requests from the standard ports –>
     <!–
      <tcpipSMB port="1445" platforms="linux,solaris,macosx"/>
      <netBIOSSMB sessionPort="1139" namePort="1137" datagramPort="1138" platforms="linux,solaris,macosx"/>
     –>

      <hostAnnounce interval="5"/>

      <!– Use Win32 NetBIOS interface on Windows –>
      <Win32NetBIOS/>
      <Win32Announce interval="5"/>

<!–
      <WINS>
         <primary>1.2.3.4</primary>
         <secondary>5.6.7.8</secondary>
      </WINS>
–>
      <sessionDebug flags="Negotiate,Socket"/>
   </config>

   <config evaluator="string-compare" condition="FTP Server" replace="true">
     <serverEnable enabled="true"/>
                  <bindto>VotreAdresseIPVirtuelle</bindto>
<!–      <debug flags="File,Search,Error,Directory,Info,DataPort"/> –>
   </config>

   <config evaluator="string-compare" condition="NFS Server">
     <serverEnable enabled="false"/>
   </config>

   <config evaluator="string-compare" condition="Filesystems" replace="true">
     <filesystems>

       <!– Alfresco repository access shared filesystem –>
         <filesystem name="Alfresco">
            <store>workspace://SpacesStore</store>
            <rootPath>/app:company_home</rootPath>

         <!– Add a URL file to each folder that links back to the web client –>
         <urlFile>
               <filename>__AlfrescoClient.url</filename>
               <webpath>http://${localname}:8080/alfresco/</webpath>
            </urlFile>

         <!– Mark locked files as offline –> 
          <offlineFiles/>

         <!– Desktop actions –>
         <!– Uses a client-side application to trigger a server-side action                         –>
         <!–   Echo - displays a message echoed from the server                                     –>
         <!–   URL  - launches a URL via the Windows shell                                          –>
         <!–   CmdLine - launches the Notepad application                                           –>
         <!–   CheckInOut - checks files in/out, drag and drop files onto the application           –>
         <!–   JavaScript - run a server-side script                                                –>
         <!–   JavaScriptURL - server-side script that generates a URL to the folder using a ticket –>
         <!–                   to avoid having to logon                                             –>

         <desktopActions>
            <global>
                    <path>alfresco/desktop/Alfresco.exe</path>
               <webpath>http://${localname}:8080/alfresco/</webpath>
            </global>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.EchoDesktopAction</class>
               <name>Echo</name>
                 <filename>__AlfrescoEcho.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.URLDesktopAction</class>
               <name>URL</name>
                 <filename>__AlfrescoURL.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.CmdLineDesktopAction</class>
               <name>CmdLine</name>
                 <filename>__AlfrescoCmd.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.CheckInOutDesktopAction</class>
               <name>CheckInOut</name>
                 <filename>__AlfrescoCheckInOut.exe</filename>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>
               <name>JavaScript</name>
               <filename>__AlfrescoScript.exe</filename>
               <script>alfresco/desktop/dumpRequest.js</script>
               <attributes>anyFiles, multiplePaths , allowNoParams</attributes>
               <preprocess>confirm, copyToTarget</preprocess>
            </action>
            <action>
               <class>org.alfresco.filesys.smb.server.repo.desk.JavaScriptDesktopAction</class>
               <name>JavaScriptURL</name>
               <filename>__AlfrescoDetails.exe</filename>
               <script>alfresco/desktop/showDetails.js</script>
               <attributes>anyFiles</attributes>
               <preprocess>copyToTarget</preprocess>
            </action>

         </desktopActions>
                    
<!–
            <accessControl default="Write">
               <user name="admin" access="Write"/>
               <address subnet="90.1.0.0" mask="255.255.0.0" access="Write"/>
            </accessControl>
–>
         </filesystem>
        
       <!– AVM virtualization view of all stores/versions for WCM –>
         <avmfilesystem name="AVM">
            <virtualView/>
         </avmfilesystem>
        
      </filesystems>
   </config>

   <config evaluator="string-compare" condition="Filesystem Security" replace="true">
      <authenticator type="alfresco">
       <Server>IP_DU_CONTROLEUR</Server>
       <Domain>DOMAIN</Domain>
      </authenticator>

<!–
      <globalAccessControl default="None">
         <user name="admin" access="Write"/>
         <address ip="90.1.0.90" access="Write"/>
      </globalAccessControl>

      <users>
         <localuser name="user">
            <password>user</password>
            <comment>Normal user account</comment>
         </localuser>
   
         <localuser name="administrator">
            <password>admin</password>
            <administrator/>
            <comment>Administrator account</comment>
         </localuser>
      </users>
–>
   </config>


</alfresco-config>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Re: salut a toute la compagnieje suis nouveau sur alfresco...

dakylla — Fri, 16 Nov 2007 08:24:50 GMT

un grand merci huberd, ta configuration marche impecablement .
bon, j em'en vais faire la meme chose avec liferay

merci encore

Re: salut a toute la compagnieje suis nouveau sur alfresco...

huberd — Fri, 16 Nov 2007 08:31:04 GMT

ravi d'avoir pu t'aider.

Re: salut a toute la compagnieje suis nouveau sur alfresco...

tino_78 — Fri, 08 Feb 2008 10:35:26 GMT

Huberd,

j'ai utilisé tes fichiers XML (mise à part celui pour le ldap), et mes utilisateurs peuvent effectivement se connecter avec leur credentials ActiveDirectory mais le passthru ne fonctionne pas.

Lorsque un utilisateurs se connecte sur http://alfresco:8080/alfresco/ une fenetre indiquant "net.sf.acegisecurity.AuthenticationServiceException: Failed to open passthru auth session" apparait.

Pour se connecter les utilisateurs doivent rentrer nom@domaine.com puis leur mdp.

Tu aurais une idée ?

PS:merci pour tes fichiers !

Re: salut a toute la compagnieje suis nouveau sur alfresco...

huberd — Mon, 28 Apr 2008 10:49:47 GMT

Huberd,

j'ai utilisé tes fichiers XML (mise à part celui pour le ldap), et mes utilisateurs peuvent effectivement se connecter avec leur credentials ActiveDirectory mais le passthru ne fonctionne pas.

Lorsque un utilisateurs se connecte sur http://alfresco:8080/alfresco/ une fenetre indiquant "net.sf.acegisecurity.AuthenticationServiceException: Failed to open passthru auth session" apparait.

Pour se connecter les utilisateurs doivent rentrer nom@domaine.com puis leur mdp.

Tu aurais une idée ?

PS:merci pour tes fichiers !

Oupsss, j'ai vraiment du retard par ici, un sujet que j'ai homis de mettre dans les sujets à suivre ops:

Je ne suis pas un expert en la matière, mais je pense qu'il faille que tes utilisateurs soient déclarés dans ton référentiel Alfresco. C'est à cela que sert le fichier XML Ldap comme tu l'appel ci bien. Essaye cette piste.

Par contre pourquoi n'utilises-tu pas LDAP pour synchroniser tes comptes utilisateur dans le référentiel Alfresco ? Cela te permet également de récuperer la liste de tes groupes AD et de les gérer directement dans l'AD plutôt que dans Alfresco.

David.