topic Try to use port 443 with ssl config in Alfresco Archive

Try to use port 443 with ssl config

marcùss — Wed, 25 May 2016 12:20:40 GMT

Hi everyone,I had a project with Alfresco 5.1 with a server CentOS 7 and apache Httpd 2.4.6. I have to give a external access so before, in the compagny domains, i would like to configure the alfresco apps with https access. At this moment, i can access to my server in port 8080 (if i enable it in s

Re: Try to use port 443 with ssl config

morganp1 — Wed, 25 May 2016 15:38:08 GMT

Hi Marcuss,

This is what I usually do to setup an application in SSL: http://blog.dbi-services.com/alfresco-protect-your-installation-with-apache-httpd/

I can see that you are trying to mix mod_jk and proxy setup so better just focus on one side I think. I used a RedHat 6.x OS in this blog but it will probably work without any change on CentOS too since RedHat and CentOS are pretty close.

Best regards,
Morgan

Re: Try to use port 443 with ssl config

marcùss — Thu, 26 May 2016 08:41:54 GMT

Hi Morgan,

Thank you for your answer.
I resolved the issue. I add the ip address on each <VirtualHost> and in server.xml, i add my server ip address in the connector port 8009 because jk_mount was not able to connect to Tomcat with "localhost".

Now it's working only with this setup.
I will try your setup when i will have a project with RedHat.

Best regards,
Marcus