Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER

goldy736 — Mon, 25 May 2009 13:00:37 GMT

hi,Am using Alfresco lab 3c , MySQL 5.1 ,I was successful in connecting to virtual server when my system is connected to internet , but now my task is to run Alfresco in a stand alone system , when i run my alfresco without internet connection i get the following error :17:39:13,812 Userystem INFO

Re: Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER

pmonks — Tue, 26 May 2009 01:53:22 GMT

The error you're seeing below is related to CIFS / file server configuration only, and is not related to the virtualisation server.

What output do you get from ifconfig (*nix) or ipconfig /all (Windows)? I'm guessing, but it looks like the network might not be initialised, causing Alfresco's CIFS server to fail to start.

Cheers,
Peter

Re: Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER

goldy736 — Tue, 26 May 2009 05:26:33 GMT

hi,
my ip is 10.0.0.3

my host file is:

#127.0.0.1    localhost
127.0.0.1 admin.alfrescosimple.www–sandbox.127.0.0.1.ip.alfrescodemo.net
10.0.0.3 admin.alfrescosimple.www–sandbox.127.0.0.1.ip.alfrescodemo.net
pandicebs admin.alfrescosimple.www–sandbox.pandicebs.alfrescodemo.net
pandicebs pandicebs.alfrescodemo.net
10.0.0.3 pandicebsa
‍‍‍‍‍‍‍

File-server-custom.properties :

<alfresco-config area="file-servers">
   <!– To override the default Alfresco filesystem use replace="true", to –>
   <!– add additional filesystems remove the replace="true" attribute     –>
    <config evaluator="string-compare" condition="CIFS Server">
     <serverEnable enabled="true"/>
      <host name="${localname}A" domain="${cifs.domain}"/>
     <comment>Alfresco CIFS Server</comment>
      <!– Set to the broadcast mask for the subnet –>
      <broadcast>${cifs.broadcast}</broadcast>
      <!– Use Java socket based NetBIOS over TCP/IP and native SMB on linux –>
      <!–tcpipSMB platforms="windows,linux,solaris,macosx"/–>
      
     <tcpipSMB port="3306" platforms="windows,linux,solaris,macosx" ipv6="enabled"/>
     
     <netBIOSSMB platforms="windows,linux,solaris,macosx"/>

      <!– Can be mapped to non-privileged ports, then use firewall rules to forward
          requests from the standard ports –>
     <!–       
      <tcpipSMB port="1445" platforms="linux,solaris,macosx"/>
      <netBIOSSMB sessionPort="1139" namePort="1137" datagramPort="1138" platforms="linux,solaris,macosx"/>
     –>
       
      <hostAnnounce interval="5"/>

      <!– Use Win32 NetBIOS interface on Windows –>
      <Win32NetBIOS/>
      <Win32Announce interval="5"/>
      <!– CIFS authentication –>
      <authenticator type="enterprise">
      </authenticator>     
<!–
      <WINS>
         <primary>1.2.3.4</primary>
         <secondary>5.6.7.8</secondary>
      </WINS>
–>
      <sessionDebug flags="Negotiate,Socket"/>
   </config>
</alfresco-config>‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍‍

Alfresco.log :

22:04:15,546 User:System ERROR [alfresco.smb.protocol]
CIFS server configuration error, Failed to get IP address(es) for the local server, 
check hosts file and/or DNS setup
org.alfresco.error.AlfrescoRuntimeException: Failed to get IP address(es) for the local server, 
check hosts file and/or DNS setup‍‍‍‍‍

Thank you!

topic Re: Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER in Alfresco Archive

Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER

Re: Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER

Re: Alfresco in Stand alone Computer-Connecting to VIRTUALSERVER